How to Choose the Right LED Strip Light?

Added strip lights, ribbons or tapes have become one of the most popular LED products available on the market. They were doing not only replace incandescent ribbons, but some of the fluorescent hoses as well, and definitely gave endless options for advertisements and decoration of bars, hotels, and other public places. With all the fast development of the LED technology, they are now available in very dazzling versions too, allowing users to apply it as task, or in very unlikely cases, even as a main method to obtain light. Their application is popular both in home and commercial use, therefore we collected the key characteristics of strip lights consumers need to consider if they want to associated with right choice.Added strip lights, ribbons or tapes have become one of the most popular LED products available on the market. They were doing not only replace incandescent ribbons, but some of the fluorescent hoses as well, and definitely gave endless options for advertisements and decoration of bars, hotels, and other public places. With all the fast development of the LED technology, they are now available in very dazzling versions too, allowing users to apply it as task, or in very unlikely cases, even as a main method to obtain light. Their application is popular both in home and commercial use, therefore we collected the key characteristics of strip lights consumers need to consider if they want to associated with right choice. led strip lights
Depending on our purposes the pursuing features might help us determine what we have to apply.
РThe size or type of LED included- the number of LEDs within a metre of the strip- the colors or colour temperature of the LEDs- the versatility of the deprive- the direction of LEDs on the strip- carrying capacity Рheavy duty- IP rating- Voltage- dimmers and controllers 
Of all the deciding factors mentioned above, the most crucial is probably the type and size of the LED included, both of which determine its settings or performance. This big difference has already been mentioned in one of our previous articles on ArticleBase. com: how a performance of different LED technologies (low power, SMD power and high power) ranges, as well as the dimensions of the diodes. Obviously, the greater recent the technology of the LED is, and the bigger its size is, the brighter it will be.
Another deciding factor of the performance is of course the quantity of LEDs in the strip in a metre for instance. The bigger this number is, the lighter the strip is, though extremely high numbers within a metre often require special technologies, like dual width strips – the place that the LED are located not only one after the other in two or 3 rows next to one another. With strips including a large number of LED always check their arrangement, because LEDs located too near to one another may emit too much high temperature and radically shorten the lifespan of the deprive.
The colour range of the LED is now endless, since any coloring can be made up of RED-GREEN-BLUE technique. There are generally two or three colours of white available: glowing or cold white – the bluish, really glowing version of white, the warm white – which is rather yellowish like the sun, and the natural white – which is a blend of the two in a variety of degrees. The temperature of the white colour is measured in Kelvin, and the higher colour temperatures (from about 5000 K) would be the freezing, or bluish whites and the lower ones (2700 – 3000 K) would be the warmer white colours.
Sole colour LEDs are available in nearly all colours now, but the RGB LED PRE LIT strips can also produce a sizable variety of colors. RGB strips desire a control to operate, and determine perhaps the colour of the strip should be one regular colour, or should change along with setting up the pace of change. Special pixel RGB pieces can easily change the shade in a row, creating a run-down effect. The variety of colour changes of the RGB deprive largely is determined by the knowledge of the controller too.
The versatility of the LED strips can be a deciding take into account their program. Rigid strips are ideal for replacing fluorescent tubes for instance, though there is hardly anything you would be unable to do with a flexible tape either. On flat materials it is sometimes better to work together with rigid strips, though applied to ceilings or walls – I suppose many of you came across this problem before – what appears to be flat for the eye is far from straight once examined with a spirit level. Therefore, versatility is more often a grace than the usual burden.Whitening strips are usually flexible to one dimension only, which is exactly she the direction of the LEDs can be significant. The most typical types of strips have LEDs lighting upwards, so if for instance if you need to enlighten a wheel you have to look for side-mounted or side-view whitening strips to be able to form them the right direction.
The carrying capacity of strips is generally very low. Heavy-duty tape lights are not usually sold for home use, but much rather for commercial use on delivers and in factories for instance. In home use, where carrying capacity issues – on an advantage of a stair for instance – use of profiles is the normal solution.
The IP rating of strips or any electric goods is made up of two numbers, implying the degree of security provided against the breach of solid objects (including body parts like hands and fingers), dust, animal contact, and water in electrical enclosures.
When you plan to install deprive lights at wet or humid places, outdoors, or maybe even under drinking water, then your items need to be partially or completely waterproof. 100% water resistant items have the IP rating of 68.
The Voltage of LED deprive lights should always be checked before application. Pieces running at mains are often used, but the majority of the LED strips demand a transformer, since they run at low voltage (usually 12 or 24 V). Should your strips desire a transformer, make sure it is ideal for LEDs, because electric transformers the majority of the time ruin LEDs.